Marise Payne (NSW, Liberal Party, Minister for Defence) Share this | Hansard source

I table a document relating to the order for the production of documents concerning the government's response to the report of the Economics References Committee on the future of Australia's automotive industry. I seek leave to have the document incorporated in Hansard.

Leave is granted.

The document read as follows—

Australian Government response to the Senate Economics References Committee Report: Future of Australia's Automotive Industry

September 2017

Economics References Committee

Future of Australia ' s Automotive Industry

Government Response

The Australian Government welcomes the Economics References Committee (the Committee) Report into the Future of Australia's Automotive Industry and thanks the Committee for its considered report. This response outlines the Government's view on the Committee's recommendations contained in the final and interim reports.

Automotive passenger vehicle manufacturing has been a great part of Australia's economic and social history. It has been a significant contributor to employment, to regional economies, to research and development and to Australia's exports. And it has long received bi-partisan support from Governments. The automotive passenger vehicle manufacturing sector received $18.4 billion from 2000-01 to 2014-15 through tariff protection and budgetary assistance1. This includes around $1.7 billion in assistance from the Automotive Transformation Scheme (ATS) to date, while the total automotive assistance including through its predecessor the Automotive Competitiveness and Investment Scheme since 2001, is $7 billion.

However, things changed with the decisions by Toyota (announced 10 February 2014) and Holden (announced 11 December 2013) to end their automotive vehicle manufacturing in Australia by the end of 2017, following Ford's earlier decision (announced 23 May 2013) to wind up manufacturing in 2016. Toyota and Holden have since confirmed the dates they will cease manufacturing as 3 and 20 October 2017 respectively. The manufacturers cited the then high Australian dollar, a highly competitive market and relatively small production volumes for their decisions. All three manufacturers have plans to continue an Australian presence through their other automotive industry activities such as national sales and distribution, as well as engineering services and design/product development. Toyota will maintain around 150 highly skilled engineering and technical roles in Victoria, in addition to over 1200 sales and marketing positions. This is on top of the 1750 engineers, designers and technicians retained by Ford in Victoria and the 300 to 350 design and engineering jobs GM Holden will retain post 2017.

The future of manufacturing in Australia lies in these kind of value-adding activities, from product concept, research and development, design and production to distribution and after-sales service. Australia must remain competitive as manufacturing around the globe undergoes major transformation. The Australian Government has been on the front foot of this transition to advanced manufacturing, firstly through the successful $155 million Growth Fund, and now with the announcement of the new $100 million Advanced Manufacturing Fund which will boost innovation, skills and employment in advanced manufacturing as industries transition following the wind-down of vehicle manufacturing. The new fund will help car-related businesses move into other industries and fund tertiary engineering courses and research into manufacturing techniques.

The Advanced Manufacturing Fund will include the following elements:

The Advanced Manufacturing Fund is the latest instalment in the Australian Government's support for the transition of the automotive passenger vehicle manufacturing sector since 2013. The three year window for transition has provided a unique opportunity for businesses to diversify and for workers to reskill. In addition to the $100 million Advanced Manufacturing Fund, there are a variety of initiatives that have supported and will continue to support the Australian automotive industry in its transition, including those workers and businesses affected by the closures.

The Automotive Transformation Scheme (ATS) is a legislated entitlement scheme that provides assistance to registered participants for the production of motor vehicles and engines. The Scheme aims to encourage competitive investment, innovation and economic sustainability in the Australian automotive industry. The continuation of the ATS, as legislated to 2020, will support an orderly transition of the automotive manufacturing sector post 2017. This means, firms who undertake eligible ATS activities, including in the export side of their businesses, can continue to apply for funding during this period.

The Government recognises while in transition, business could benefit from reduced regulatory burden of ATS participation. The Government will review the administrative regulations that impact on businesses transitioning, such as re-registering for the ATS, or changing registration categories from a Motor Vehicle Producer to an Automotive Services Provider, or registering under the national interest provisions of the ATS. The Government understands the time pressures businesses are under, and will consult with ATS participants on how best to reduce the regulatory burden associated with the ATS.

One thing must be made clear though: The decline in demand for locally made vehicles has resulted in a reduction in production volumes. This has seen a corresponding fall in demand for the ATS, so expenditure has correspondingly declined. That has led to calls for the ATS "underspend" to be redirected for other activities, such as funding for other related automotive activities such as caravans and trailers or the aftermarket component makers – sectors their respective industry associations report are growing. The ATS has a legislated cap with expenditure based on claims for eligible activity. Budget provision is made on estimated demand. There is no underspend that can be redirected for other purposes should the legislated cap not be reached, no ATS 'pot of money' to use for non-ATS eligible activities.

Support is already available to these other growing sectors through other Government initiatives such as skills and training initiatives, the R&D Tax Incentive, and the National Innovation and Science Agenda. The Government is focused on getting the economic framework right for further investment and job creation by businesses.

The transition of the sector is complemented by the Government's successful $155 million Growth Fund, developed in response to the decisions by Holden and Toyota to end passenger vehicle manufacturing in Australia by 2017. The Growth Fund is helping automotive workers transition to new jobs, encouraging diversification by automotive supply chain firms, and accelerating new private sector business activity outside of car manufacturing in Victoria and South Australia.

The Growth Fund comprises four elements:

Grant recipients in Victoria include Sealite which is establishing a new manufacturing centre for specialist marine navigation aids and aviation ground lighting systems, MiniFAB which is manufacturing medical diagnostic consumables with built-in bio-assays and molecular reagents, and Third Zeton which manufactures road transport tankers.

Grant recipients in South Australia include LaserBond which is producing innovative mineral extraction tool products, Seeley International which manufactures evaporative coolers and air conditioners and Ezy-Fit Engineering which manufactures heavy-duty hydraulic cylinders

The $30 million Skills and Training Initiative, open until the end of 2018, is helping automotive workers find new jobs before they are retrenched. The initiative will provide displaced Holden and Toyota and automotive supply chain workers with access to a range of information services, careers and training advice, skills recognition and training as well as support to find a new job.

Funded by Holden and Toyota, this is primarily assisting their workers, however, Toyota have specifically partitioned $3 million of their contribution for workers in their supply chain.

This complements South Australian and Victorian Government programmes and includes information about jobs in demand in local and regional areas, financial education, careers and training advice, skills recognition and training.

Grant recipients in Victoria include Australian Precision Technologies which is manufacturing components for aerospace and defence, Dolphin Products which is producing booster detonator retention items for the mining industry, and Venture DMG which is manufacturing edge-lit light display panels.

Grant recipients in South Australia include precision parts manufacturer Precision Components Australia which is manufacturing heliostat fields for solar thermal power generation, Numetric Manufacturing which is helping to make tail fins for the F-35 Joint Strike Fighter Program, and Quality Plastics and Tooling which expanded its clean room and in-mould labelling facilities to produce thin walled containers for the medical, food processing and cosmetic sectors.

The Australian Government also provided support for Ford workers and component manufacturing supply chain workers through the Ford Workers in Transition project which commenced in June 2013 and concluded in April 2017.

The project complemented Ford and Victorian Government transitional support for Ford workers. Pre-closure, the focus of activity through the project was on job readiness and employability skills through a range of activities. Post-closure, the focus was on the continuation of support services through outreach centres.

Jobs Fairs – connecting retrenched workers with local jobs

As part of the Government's commitment to supporting automotive workers transition into new employment, the Australian Government has run two jobs fairs targeted at Ford workers, impacted supply chain workers, their families and local communities. The Geelong Jobs Fair occurred on 25 July 2016 with around 40 exhibitors and over 600 jobs available. Around 870 job seekers attended this event. The Broadmeadows Jobs Fair occurred on 24 August 2016 with around 50 exhibitors and over 1000 job opportunities. Over 4000 job seekers attended this event.

The Department of Employment will run another six Jobs Fairs across Geelong, Melbourne and Adelaide in 2017 to further support automotive workers.

Following the announcement of the closure of Ford's manufacturing operations, the Geelong Region Innovation and Investment Fund (GRIIF) and Melbourne's North Innovation and Investment Fund (MNIIF) were established. The GRIIF and MNIIF are joint responses by the Australian and Victorian governments, together with Ford and Alcoa, to support innovative, job creation projects that strengthen and diversify their respective regional economies and employment bases. These programmes show that the Government understands that the transition of Australian manufacturing is causing broader shifts in regional areas.

The funds, as initially announced as part of a package to support the regions impacted by Ford's closure from October 2016 were each $24.5 million. In 2014, the GRIIF, comprised of the Australian and Victorian governments, together with Ford, was increased by $5 million following a contribution from Alcoa to support the region affected by its decision to close its Port Henry aluminium smelter and rolling mill in Geelong.

Three rounds of GRIIF funding have been completed with 17 grant recipients undertaking projects supported by funding totalling $26.9 million to create an estimated 818 jobs and leverage over $213 million in total project investment. As at 31 August 2017, 897 new jobs had been created and $129.1 million had been invested.

Two rounds of MNIIF funding have been completed with 20 grant recipients undertaking projects supported by funding totalling $18.8 million to create an estimated 487 jobs and leverage over $92.4 million in total project investment. As at 31 August 2017, 558 new jobs had been created and $86.5 million had been invested.

Automotive Supplier Excellence Australia (ASEA)

Business capability development is an important complement to the Automotive Diversification Program which has been funding capital equipment purchases.

Automotive Supplier Excellence Australia (ASEA) is a national programme established to assist tiers 1, 2 and 3 within the Australian automotive supply base to achieve world-class levels of competitiveness and sustainability. Since 2007, ASEA have worked with more than 120 companies within the automotive supply chain, including some who have set up manufacturing facilities in South East Asia.

ASEA had previously received a $2.6 million competitive grant from the Australian Government up to June 2016 to work with supply chain companies to transition and diversify them outside of the automotive industry.

The Australian Government has now provided an additional $1.125 million in funding to allow ASEA to keep improving and diversifying these businesses up to the end of passenger vehicle manufacturing at the end of 2017. The extension in funding will allow ASEA to work with around 20 further companies.

Manufacturing will continue to be an important element in Australia's industry mix. It adds diversity and depth to economic activities that provide resilience to global and domestic economic changes. It is a supplier and market for other industries, and makes large contributions to research and development, skills and technology transfer, exports, productivity growth and jobs.

The Government is committed to ensuring that our manufacturing industry is internationally competitive and moves in step with the global transition to the smart, value-added and export-focused industries of the future.

Ford ' s Asia-Pacific Product Development Centre (APPDC)

With the cessation of domestic vehicle manufacturing, Ford Australia will now focus on non-sales and marketing activities at its Asia-Pacific Product Development Centre. The APPDC headquarters, located at Broadmeadows, has already evolved into a R&D innovation hub and will serve as the primary product development campus, aiming to accelerate the pace of new vehicle launches and lead consumer driven product improvements. When combined with the R&D Centre at Geelong and the Ford Proving Ground at Lara, Ford Australia has an estimated product development workforce of approximately 1,750 people. The three facilities will continue to design, engineer and test vehicles with leading quality, fuel economy, safety and smart technologies for global markets and customers.

Ford Australia has announced that it has ongoing business with around 63 Australian component suppliers to ensure the supply of service/replacement parts for up to ten years. In addition, around 19 of these local suppliers have earned business within Ford's global supply operations.

Holden

Post 2017 Holden will continue its Global Design centre based at its Port Melbourne headquarters in addition to the Lang Lang Proving Ground to adapt and test imported vehicles for Australian conditions. Engineering work conducted will cover vehicle structures and dynamics, power train specialising in global V6 engines and global emissions calibration, and advanced vehicle development. Holden estimates it will retain around 300 to 350 design and engineering jobs between the two sites.

Toyota

Toyota Motor Corporation Australia's post-manufacturing business model will include a number of strategic automotive R&D functions supporting approximately 150 engineering, design, and technical training roles in Victoria. This includes the dedicated design studio, the expanded vehicle evaluation facility and workshop, the proving ground, the multimedia and connect mobility workshop, and the Toyota genuine accessory engineering centre and workshop.

These functions will specialise in a range of areas including: styling design, software design, heavy duty off road vehicle performance development, benchmarking, and technical and driver training.

The Government is implementing the $1.1 billion National Innovation and Science Agenda (the Agenda) which is a blueprint for building a more innovative Australia, and will position our country to seize the next wave of economic prosperity. The Agenda comprises a suite of initiatives designed to encourage businesses to be more innovative. It is designed to help deliver new sources of growth, maintain high-wage jobs and seize the next wave of economic prosperity. As in many other areas of industry, advances in technology have the potential to transform existing manufacturing business and build new ones; and to create new products, processes and business models.

The Agenda is building on key measures the Government already has in place including its $250 million Industry Growth Centres initiative. The Growth Centres Initiative is the centrepiece of the Government's industry policy direction to boost Australia's productivity and competitiveness. Growth Centres have been established in six key sectors of the Australian economy:

Each Growth Centre highlights opportunities and drives activities to boost productivity by increasing collaboration and commercialisation, improving management and workforce skills, reducing red tape and assisting the sector to engage in international markets. The Growth Centres are working to realise commercial opportunities and drive innovation by building links between businesses and industry organisations and the science and research sector. They will continue to assist Australian industry to better capitalise on the excellent research and development undertaken and scientific knowledge generated in Australia.

The Advanced Manufacturing Growth Centre (AMGC) has established collaboration hubs in 3D printing, advanced materials and industry 4.0, to leverage off our strong research base in these areas and encourage stronger collaboration with industry. The Growth Centre will work closely with the Innovative Manufacturing Cooperative Research Centre to accelerate Australia's rapid transition into high value, high knowledge-based manufacturing.

One of the key areas of advanced manufacturing for Australia is defence industries. The Government has established a new Centre for Defence Industry Capability (CDIC) to help build a strong, sustainable, internationally competitive, Australian industry that meets defence capability requirements.

The CDIC is the front door for business to access the Government's defence industry business advice and grants. The CDIC also facilitates access to the Government's new Defence Innovation Hub and Next Generation Technologies Fund, which are key elements for building Australia's integrated defence innovation ecosystem as an essential part of our economy.

The CDIC is delivered through the Department of Industry, Innovation and Science's AusIndustry to leverage the networks and expertise of other business support programmes. The CDIC's national presence is enhanced by accessing and working with AusIndustry Regional Managers.

In addition to the advisory services and grants that businesses can apply for the CDIC is providing new ways for defence and industry to work together to ensure a closer alignment between industry's investment in future skills and defence's capability needs.

The Entrepreneurs' Programme is also working with 639 advanced manufacturing businesses to help them fundamentally review their processes and operations. The Programme uses experienced Advisers and Facilitators, drawn from industry, to ensure businesses get the advice and support they need to improve their competitiveness, productivity and to maximise their growth potential. The primary focus is on providing access to tailored advice and connection and networking opportunities to grow their business and capitalise on opportunities. This is done through three elements:

Although not specifically focused on auto diversification, the Entrepreneurs' Programme through its Business Management element, is currently building the capabilities of automotive component suppliers in niche markets. For example, projects are currently underway, focusing on the supply chain of a manufacturer of long haul trucks, and another on the conversion of imported vehicles.

Through the Ministerial Forum on Vehicle Emissions, the Government is working with the automotive sector to address environmental and health challenges and keep Australia in line with international vehicle markets. The Forum is consulting on three measures to reduce emissions from motor vehicles: new fuel efficiency standards for light vehicles, stronger air pollution standards for cars, trucks and buses, and improved fuel quality standards. The Forum is also considering support for emerging technologies.

From 20 December 2016 to 10 March 2017, the Ministerial Forum released for public consultation two Regulation Impact Statements on:

The Ministerial Forum also released a discussion paper on options to improve fuel quality standards.

Over 40 submissions were received on both Regulation Impact Statements and over 70 were received on the discussion paper. The submissions were made by businesses, individuals and other organisations, including vehicle manufacturers, state governments, transport operators, consumer, health and environment groups.

The Government will consider all submissions as it finalises its position on these issues.

In summary, Australia's automotive industry has been in transition and will continue to be an important part of Australia's economic prosperity. The Australian Government has provided and is continuing to provide significant assistance for the transition of the sector, its workers and businesses. To be globally competitive the transition of the automotive industry must focus on adapting to new technologies, expanding into new markets and connecting to global opportunities. The Australian Government has the policies and programs in place to enable the transition.

Attachment A addresses the recommendations made in the Committee's Report into the Future of Australia's Automotive Industry. Attachment B addresses additional recommendations from the Australian Greens and the Australian Motoring Enthusiast Party.

Attachment A

Recommendation 1

•   The committee recommends that the Australian Government work with stakeholders—across industry, unions and state and territory governments—to develop an internationally competitive automotive industry policy framework for the entire industry, recognising the strategic role the industry can continue to play in a diversified economy.

The Australian Government notes this recommendation.

The Government has worked with stakeholders across the industry on the development and implementation of automotive initiatives. The Government will continue to work with stakeholders across the industry as the automotive industry continues to transition.

Automotive manufacturing is part of a broader set of manufacturing activities in Australia that are critical to the economy. The Government has a broad set of initiatives aimed at promoting innovation in the Australian economy, including manufacturing.

The Government will work closely with a range of stakeholders across industry, research, and government on the implementation of the $100 million Advanced Manufacturing Fund.

Recommendation 2

•   The committee recommends that the Australian Government maintain the current level of Automotive Transformation Scheme (ATS) funding through to 2020-21 as provided for in the ATS Act, and allow current underspends in the ATS to be brought forward from stage 1 (ending 2015-16) to stage 2 (ending 2020-21).

The Australian Government partially supports this recommendation.

The ATS will remain as legislated so that it will continue to support the orderly transition of the automotive manufacturing sector post 2017. The ATS has a legislated cap for a particular purpose with expenditure based on eligible activity. Therefore, there is no "underspend" that can be used for other purposes, should the legislated cap not be reached.

Recommendation 3

•   The committee recommends redefining the ATS into a broader, automotive-related advanced manufacturing, engineering and design program that is intended to maintain skills and industrial capabilities and mitigate the loss of jobs by supporting supply chain diversification, new manufacturing investment and jobs growth.

The Australian Government does not support this recommendation.

The Australian Government has no plans to amend the ATS. The ATS aims to encourage competitive investment, innovation and economic sustainability in the Australian automotive industry. The Government already has a broad range of initiatives that support many different aspects of Australian manufacturing such as the Advanced Manufacturing Fund, the Growth Fund, the Entrepreneurs Programme, the R&D Tax Incentive and the National Innovation and Science Agenda. These measures assist manufacturers to improve different business areas from product concept, research and development, design and production, to distribution and after-sales service. This will enable manufacturers to transition to the necessary skills and capabilities needed for smart, niche and export-focused industries of the future.

Recommendation 4

•   The committee recommends that the object of the Automotive Transformation Scheme Act be updated to better reflect the current situation within industry and the need for targeted support for diversification and transformation activities, particularly in the automotive manufacturing supply chain. The new object should specify that the ATS is designed for the promotion and growth of advanced automotive industries in Australia, including: components and materials, new technologies, engineering and design for both domestic and offshore customers when that work is performed in Australia.

The Australian Government does not support this recommendation.

As noted, the Australian Government has no plans to amend the ATS. This means, firms who undertake eligible ATS activities, including in the export side of their businesses, can continue to apply for funding during this period.

However, the Government recognises while in transition, automotive businesses currently supported by the ATS could further benefit by reducing some the regulatory burden of the ATS. The Government will consult with participants on elements of the ATS regulations that may be a barrier to the further transition of the sector.

Automotive diversification is already being actively supported through the Growth Fund and will be assisted by the new Advanced Manufacturing Fund.

Recommendation 5

•   The committee recommends that the ATS rules and eligibility criteria should be amended to encourage further investment in research and development (R&D) so that manufacturers can continue to secure complex design and engineering work and to provide greater support for diversification initiatives, including (but not limited to):

–   amend the ATS rules to allow for the claiming of R&D relating to products and services for non-automotive industry sectors to facilitate the transition of manufacturers out of motor vehicle production;

–   amend the ATS rules to allow for the claiming of R&D and engineering services across the registration categories for both domestic and offshore automotive customers when that work is performed in Australia;

–   amend the definition of automotive services so that the concept of eligible automotive services is broader than passenger motor vehicles and light commercial vehicles (and covers all modes of mobility);

–   remove the once a year registration requirement to allow for ease of movement between ATS registration categories as the transition within the industry progresses; and

–   amend the ATS rules to allow motor vehicle producers to remain eligible for the scheme, even in the event of declining production volumes.

The Australian Government does not support this recommendation.

As noted, the Government will consult with the sector on how best to reduce the regulatory burden associated with the ATS, to assist in the transition of the sector.

The ATS already supports R&D of automotive manufacturers and the automotive supply chain. As defined in the ATS there are a broad range of R&D activities for creating new or improved materials, products, devices, production process or services that are supported by the program.

The automotive industry also benefits from the broad range of existing initiatives that can support its R&D activities, such as the R&D Tax Incentive, the Advanced Manufacturing Fund, the National Innovation and Science Agenda, the Growth Fund, Cooperative Research Centres and the Industry Growth Centres Initiative.

Recommendation 6

•   Government must recognise that the automotive industry will endure. Given this recognition, the committee recommends that the government devote the necessary resources across a range of government departments to ensure the process of transformation continues. This includes a redefinition of the automotive industry to recognise and support the role of all sectors, including, but not limited to, motor vehicle production, component making, aftermarket manufacturing, engineering and design, servicing and smash repairs, retail motor trades, sales support and training.

The Australian Government partially supports this recommendation.

The Government recognises the importance of the automotive industry and that it is currently in transition. The Government has resources across the Commonwealth with responsibility for the various parts of the industry that will continue to monitor and work with the industry as it transitions.

Recommendation 7

•   The committee recommends that the Australia Government support the establishment of an Automotive Ind